Preparation; Controls And Functions; Center Unit Front Panel (Front, Top) - Yamaha YSP-4300 Owner's Manual

PREPARATION

Controls and functions

Center unit front panel (front, top)

YSP-CU4300
1 2 3
YSP-CU3300
1 2 3
1
Remote control sensor
Receives infrared signals from the remote control (☞p. 9).
2
Remote control sensor of a TV
Receives infrared signals from the TV remote control when
the TV Remote Repeater function is enabled (☞p. 12).
3
Wireless module
Receives and sends wireless signals. Do not place metal
objects in front of the wireless module as they may interfere
with the wireless module's ability to receive and send
wireless signals.
4
Front panel display
Shows information about the operational status of this unit
(☞p. 8).
5
USB jack (YSP-4300 only)
Enables connection of a USB device (☞p. 48, 54).
6
SURROUND indicator
Lights up according to the input signal.
Displayed
color
Blue Following surround audio signal formats:
Dolby TrueHD, Dolby Digital Plus, DTS-HD
Master Audio, DTS-HD High Resolution,
Multi-channel Linear PCM
Orange Surround audio signal other than above
Off Stereo/monaural audio signal or no signal
Input signal
8
8
4 6 7
7
STATUS indicator
Lights up when the power is turned on, and goes off in the
standby mode.
8
INPUT key
Selects the playback component (☞p. 32).
9
VOLUME (+/-) key
Adjusts the volume of the unit (☞p. 32).
0
key
Turns on the unit or set it to the standby mode.
Note
In the standby mode, this unit consumes a small amount of
power in order to search for HDMI signals or to receive
infrared signals from the remote control.
9 0
4 5 67
9 0
5
En