Operating An Ipod Via The Tv Screen - Yamaha YSP-4300 Owner's Manual

2
Connect the USB cable to the USB jack on
the front of this unit.
"Plugged" will be displayed.
Plugged
3
Press the USB key to switch the input
source to USB.
4
Select content stored on the iPod and start
1)
playback.
• Press the iPod CONTROL key to operate the iPod
using controls displayed on the TV screen.
• When controlling the iPod itself (☞p. 52), turn off the
TV screen by pressing the iPod CONTROL key.
y
1)
Play video content on the iPod screen.

Operating an iPod via the TV screen

When an iPod is connected to this unit via the USB cable
supplied with the iPod, operation can be controlled via the TV
screen.
• See "Displaying the menu screen on the TV" (☞p. 21) for
instructions on displaying the iPod operation screen on the TV.
• iPod operation cannot be controlled via the TV screen when an
iPod is connected to this unit wirelessly via YIT-W12TX. Use
iPod operations to control the iPod.
1
Press the USB key to switch the input
source to USB.
A screen like that shown below is displayed when the
input source is switched to USB. If this screen is not
displayed, press the iPod CONTROL key.
[ i P o d ]
T o p
M u s i c
V i d e o s
If "No device" is displayed on the TV screen
iPod and USB connections.
2
Press the / / /
and press the ENTER key to apply the
selection.
Once a song has been selected, playback begins and the
playback screen is displayed.
[ i P o d ]
A r t i s t 0 1
A l u b u m 0 1
S o n g 0 1
y
Tips
3)
• Press the key to return to the previous menu.
• Use this unit's remote control to pause playback or skip songs
(☞p. 52).
y
2)
"No Device" is displayed in the front panel display.
y
3)
The RETURN key performs the same function as the
Playback features
>
>
1 / 2
2)
, check all
keys to select content,
0 : 3 0
key.
49
En