Yamaha YSP-4300 Owner's Manual page 29

Saving settings to system memory
1
Hold down the SYSTEM MEMORY 1, 2,
or 3 key until "M1 Save?", "M2 Save?", or
"M3 Save?", corresponding to the button
pressed, is displayed.
2
Press the same SYSTEM MEMORY key
1)
again.
When the SYSTEM MEMORY 1 key is pressed, "M1
Saving" is displayed, and settings are saved.
y
1)
• If system settings are already stored in the selected memory number,
this unit overwrites the old settings.
• The memory function cannot be set when "MEMORY PROTECT" is
set to "ON" in the advanced setup menu (☞p. 66).
Loading settings
1
Press the SYSTEM MEMORY 1, 2, or 3
key corresponding to settings to be
loaded.
If the SYSTEM MEMORY 1 key is pressed, "M1
Load?" will be displayed.
2
Press the same SYSTEM MEMORY key
again.
When the SYSTEM MEMORY 1 key is pressed, "M1
Loading" is displayed, and settings are loaded.
Initial settings
29
En