Selecting A Sound Mode; Sorround Operation; Advanced Theater Mode ( Dolby/Dts Mode) - Pioneer VSX-D710S Operating Instructions Manual

Sound Modes
Selecting a Sound Mode
To ensure the best possible surround sound, be sure to
complete the set up procedures described in "Setting Up
for Surround Sound" (starting on page 16) before using
the sound modes This is particularly important when
using the Ul (Dolby) surround mode
Surround operation
A-1
Jh
2
EFFECT +/-
1 Press RCV
This sets the remote to select the sound mode
(You can skip this step when using the controls on
the receiver )
2 Press DSP MODE to select the sound mode
Each press changes the DSP mode as follows
r
HALL 1 -b HALL 2 + JAZZ + DANCE
KHSTEREOtTHEATER2 tTHEATER1
J
(VSX-D810S
/D850S only)
MEMO:
l
The amount of effect of each DSP mode can be
adjusted in the range of 10 to 90 (the default setting
value is 70) by pressing EFFECT +/-
* The DSP effects can't be heard in 6 channel stereo
(VSX-DSlOS/DSSOS only)
l
For VSX-D810SNSX-D850S receivers, when the
surround back channel is set to off 6 channel stereo
becomes 5 channel stereo
ADVANCED THEATER mode ( Dolby/
DTS mode)
Switch on the DolbyKITS mode by pressing the M/DTS
button When Dolby/DTS mode is ON, Dolby Pro Logic,
Dolby Digital and DTS, and signal processing is per-
formed automatically corresponding to the input signal
Use this button to cycle through the various modes
7
1 Switch the Dolby/DTS mode on and off by
pressing Ul/DTS on the remote control or
IIWDTS on the front panel
Each press changes the display as follows
(VSX-D71OS)
c
STANDARD + MUSICAL + DRAMA
OFF c- EXPANDED t ACTION
J
(VSX-D810S/D850S)
c
* STANDARD --b MUSICAL ----) DRAMA
OFF t 5/6-DTHEATER e ACTION
*When using DTS 5 l/6 1 ch discs in STANDARD
mode the display will change to "DTS-ES" Naturally
the playback will still be 6 1 output (VSX-DSlOS/
DSSOS)
Refer to page 27 for more details about each
surround effect
MEMO:
l
The effects of Dolby/DTS mode can be adjusted in
the range of 10 to 90 by pressing EFFECT +/- (the
default setting is 70) Also, the effect level can be set
in each ADVANCED THEATER mode by pressing the
EFFECT +/-button The STANDARD mode cannot
be changed
l
For the VSX-D810SNSX-D850S, when the surround
back channel is set to off in the speakers settings, 6-D
Theater becomes 5-D Theater
30
En
When the STANDARD mode is selected, DSP modes are
off