Setting The Volume Level Of Each Channel 2 - Pioneer VSX-D710S Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-D710S:
Table of Contents

Advertisement

Preparations
Optical digital
input 4 setting (VSX-
D850S only)
Here you tell the receiver what component you have
hooked up to the optical input jack 4
Press
A
or
V
to select the optical digital
input 2 (DVD, TV, CD, CD-R, VCR, or OFF)
After you assign a component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting You can see this in the
DIGITAYANALOG
indicator on the front of the
receiver
MEMO:
l
The initial setting is
"VCR"
l
The digital out signal corresponds to the selected
input function (for example, DVD)
Setting the Volume level of
Each Channel (adjusting
the
speaker volume balance)
Use to set the relative volume of each channel
CH
I
SELECT
4
Press
TEST TONE
to output the test tone
The test tone is output in the following order
VSX-D7 1 OS
r
FL --,
CT +
FR
SW +
SL f-
SR J
VSX-D810S/D850S
r
FL-+CT+
FR+
SR
SW +
SL
+
SB J
Test tone is only output in Dolby/DTS modes The
test tone sequence corresponds to the speaker setting
mode
Adjust speaker levels so that you hear the
test tone at the same volume from each
speaker when seated in the main listening
position
If a speaker is deselected in the speaker setting mode
(see p 17) then no test tone will be output for that
speaker
The channel level range is * 10 dB
Levels can be set for each surround mode
Press
TEST TONE
to turn off the test tone
MEMO:
Since the SUBWOOFER transmits an ultra-low
frequency its sound may seem quieter than it actually
is
The speaker volume can be adjusted without
outputting
the test tone by pressing CH LEVEL or
CH SELECT button
Initial setting is 0 dB
You can set each sound mode individually
and these
settings are completely independent
of each other
The sound modes you can set include DSP, stereo,
DVD 7 1 Ch and CXl/DTS, as explained in steps
above However, you can only use the test tone
feature when setting W/DTS
1 Press OWDTS
2
Press
MASTER
VOLUME
+ or - to adjust the
volume to an appropriate
level
21
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-850sVsx-d810s

Table of Contents