ADTRAN IP 712 Quick Reference Manual page 17

Phone Feature Quick Reference
Place a Call
Pick up handset or press the Speakerphone
button. Enter the desired number or enter the number on
the keypad. Then press the Dial soft key.
Answer a Call
Pick up the handset, press the Answer soft
key, or the Speakerphone button.
Hold
Once a call is established, press the Hold button
(or Hold soft key) to place the caller on hold. To retrieve
a call on hold, press the Hold button, Resume soft key, or
the Line key.
Mute
While a call is active, press the Mute button to mute
the audio you are sending to the other party. Press the Mute
button again to un-mute.
Unattended Transfer
Once a call is established, press
the Transfer key or Transfer soft key and enter the target's
extension. Once the phone starts ringing, press the Transfer
key (or Transfer soft key) again to complete the transfer, or
simply hang up to complete the transfer.
Attended Transfer
Once a call is established, press the
Transfer key or Transfer soft key and enter the target's
extension. Once the target has answered, announce the
caller then press the Transfer key (or Transfer soft key) to
complete the transfer or hang up.
17
Blind Transfer
Once a call is established, press the Transfer
key or Trnsfer soft key, then the Blind soft key and enter the
target extension.
Park Call
Once a call is established, press the More soft key,
then press Park, enter a Park Zone number (0 to 9), then press
the Park button again or use the Park Zone Busy Lamp Field (BLF).
Retrieve Parked Call
Obtain dial tone. Press the Pickup
soft key, enter the Park Zone number (0-9), and then press
the Retrieve soft key to pickup the call.
Page
Obtain dial tone. Dial overhead paging extension or
SPRE code (________). Page the party, then hang up.
Conference (Three-Way)
While on a call, press the
Conference button (or select the More soft key, then press
the Conference soft key), and dial the third-party's extension.
Once the party has answered, press the Conference button
(or the Conference soft key) again to connect the parties.
Forward Call
Press the Forward soft key. Enter the
destination extension (or outside number), and then
press the Enable soft key. When enabled, all incoming
calls will be re-directed to the forwarded extension
or number.