ADTRAN IP 712 Quick Reference Manual page 14

ADTRAN IP 700 Series Phone Function Keys
®
Function Key Icon Name
Messages Messages LED illuminates
Blue to indicate
message waiting
Hold Hold
Transfer Transfer
Conference Conference
Speed Dial Entry
Directories Directories
Goodbye Goodbye
Mute LED flashes Red
when active
Headset LED illuminates Green
when in use
Speaker LED illuminates Green
when active
Volume Voice Mail
14
Description
The LED can be configured to illuminate solid, flash, or blink to indicate the
message count. It can be set to directly access voice mail by pressing the
message indicator key. Contact your system administrator for more information.
Press to place the current call on hold.
Press to initiate a call transfer.
A call is active on the line.
Press to add a third party to an active call.
Press to access the System and Personal Contacts directories, as well as
display placed, missed, and incoming call histories.
Press to disconnect from the current call.
Press to silence the speaker, handset, or headset microphone. Press the mute
key again to reactivate audio.
Indicates that the headset is active. You must have a headset connected to
your phone to use this function.
Press to enable the speaker.
+
The ringer volume is adjusted using this function key while the phone is idle.
The call volume is adjusted using this function key during an active call. Press
the + (plus) end of the key to increase the volume or press the – (minus) end
–
of the key to decrease the volume.