SMART Board Board 800 series User Manual page 4

I M P O R T A N T I N F O R M A T I O N
Two people are required to safely mount your interactive whiteboard because it is too heavy
l
for one person to safely maneuver. When you and your assistant lift your interactive
whiteboard, support its weight at the bottom, avoiding the corner cameras, and balance the
top with your other hands.
The weight of the interactive whiteboard is approximately 52 lb. (23.7 kg) for the
l
SMART Board 880 interactive whiteboard and 61 lb. (27.5 kg) for the SMART Board 885
interactive whiteboard. Check your local building codes to ensure that your wall can support
this weight, and use appropriate mounting hardware for your wall type.
To prevent injury or product and property damage, use only the mounting hardware supplied
l
with your SMART Board 800 series interactive whiteboard when you install your product on
drywall. The mounting hardware provided with other interactive whiteboards may not be
strong enough to support the weight of SMART Board 800 series interactive whiteboard.
Use two wall-mounting brackets to install SMART Board interactive whiteboards with a
l
diagonal width of 87" (221 cm).
For operating safety and to prevent damage to your interactive whiteboard, connect its USB
l
connector, or SMART connection extenders, only to a computer that has a USB compliant
interface and that bears the USB logo. In addition, the USB source computer must be
compliant with CSA/UL/EN 60950 and bear the CE mark and CSA and/or UL mark(s) for
CSA/UL 60950.
To prevent injury or product damage as a result of tipping, mount your interactive whiteboard
l
only on a floor stand that is certified for use with SMART Board 800 series interactive
whiteboards, such as the SMART FS670 Mobile Floor Stand or SMART HAWM FS-UX
Mobile Height-Adjustable Floor Stand. Do not modify your interactive whiteboard or the floor
stand to make them compatible.
Move a floor stand-supported SMART Board interactive whiteboard with care. Sudden stops,
l
excessive force and uneven surfaces may cause the product to overturn.
C
C A U T I O N
If you're replacing a SMART Board 500 or 600 series interactive whiteboard with the heavier
l
SMART Board 800 series interactive whiteboard on drywall, you must remove the wall-
mount bracket and mounting hardware, and then install all the mounting hardware and
brackets supplied with your SMART Board 800 series interactive whiteboard instead.
ii