Table of Contents
Advertisement
9. MAINTENANCE
BLADE REMOVAL AND INSTALLATION
When the blade needs sharpening or replacement, take the lawn mower to
an authorized Honda lawn mower dealer. Or, if you have a torque wrench, you
can remove and install the blade yourself. Wear heavy gloves to protect your
hands.
l
Blade sharpening: lb reduce the possibility of weakening the blade, or causing
imbalance or poor cutting performance, have the blade sharpened by an
authorized Honda lawn mower dealer.
l
Blade replacement: Use a genuine Honda replacement blade or its equivalent.
Blade Removal
B
The blade can cause serious injury. Disconnect the spark plug
cap to prevent any
possibility
of accidental
starting.
1. Turn the fuel valve OFF, and rest the mower on its right side, so the
carburetor side is up.
NOTE: Hard starting and fuel leakage may result if the mower is placed
with the carburetor side down.
2. Remove the two blade bolts with a 14 mm socket wrench. Use a wooden
block to prevent the blade from turning when removing the bolts.
3. Remove the blade and blade holder.
BLADE BOLTS y
44
Advertisement
Table of Contents
