Table of Contents
Advertisement
3. CONTROLS
CUTTING HEIGHT ADJUSTMENT
LEVERS
w
The blade can cause
serious injury. Stop the engine before
adjusting cutting height.
There are five cutting height settings:
1 in (2.7 cm), l-1 /2 in (4.0 cm), 2 in
(5.2 cm), 2-l /2 in (6.4 cm), and 3 in
(7.6 cm). These
are approximate
/
/
figures, as the actual height of cut
grass will vary with lawn and soil
conditions.
l-112 iti (4.0 cm1
2-112 in (6;4 kin)
To adjust cutting
height,
pull each
adjusting lever toward the wheel, and
move it itito another
notch.
Set both
adjusting levers to the same cutting
height position.
ADJUSTING
LEVERS
Select the correct cutting height for your mowing requirements. Cutting height
settings of l-l /2 in (4.0 cm) or 2 in (5.2 cm) are appropriate for most lawns
during cool weather. A higher cut may be needed to protect the lawn during
hot summer months. Consult a local nursery or lawn & garden center for advice
about specific types of grasses and growing conditions
in your area.
If you are not certain which cutting height to select, check the appearance
of the lawn after mowing a small area, then readjust cutting height if necessary.
12
Advertisement
Table of Contents
