Speaker Assembly With Plaster Ring - Tannoy CMS50 User Manual

3.6. Speaker assembly with Plaster Ring

An Optional Plaster ring can be used if a conventional ceiling tile is not being used.
The wings on the plaster ring are attached to the building structure via the holes
provided (Figure 3l). T. The dimensions can be seen in Figure 3l. The plaster is
applied over the bracket.
Important: Connect a safety cable to the rear of the
speaker can.
NOTE: the installation of this product must be carried
out in conformity with local building codes and
standards. If necessary consult your local safety
standards
Alternatively, check any laws or bylaws. Tannoy will not
be held responsible for any damages caused by the
improper installation of loudspeaker.
12
Figure 3l
officer before installing any product.