Speaker Assembly With C-Ring And Tile-Bridge - Tannoy CMS50 User Manual

3.5. Speaker assembly with C-Ring and Tile-bridge

If the speaker requires additional support, an optional Tile-bridge is also available for
use in conjunction with the C-Ring. This is assembled as shown in Figure 3j. The Tile
Bridge is attached to the C-ring, and the tile bridge supports placed either on the side
railings or inside the railings, depending on the size of the panel. Slide the speaker
assembly through the hole (Figure 3j) and tighten the dog tag screws, until a firm grip
is achieved (Figure 3k).
Figure 3j
Figure 3k
11