Technical Specifications - Tannoy CMS50 User Manual

10. Technical Specifications

System Type
Frequency Response (1) +/- 3dB
Power Handling(2)
Sensitivity (1) 2.83 volt @ 1m
Maximum SPL (3) @ 1m
Impedance
DI Averaged
Q Averaged
Driver Complement
Enclosure
Finish
System Weight (in back can)
Dimensions
Hole cut-out
Accessories
NOTES:
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.
@ 500Hz
@ 1kHz
@ 2kHz
@ 4kHz
@ 8kHz
@ 16kHz
@ 500Hz
@ 1kHz
@ 2kHz
@ 4kHz
@ 8kHz
@ 16kHz
(1) Average over stated bandwidth. Measured at 1m on axis, in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m.
Vented, full range ICT™ loudspeaker system
85-22kHz
50 watt
90 dB
105 dB with THP 30 Transformer (Anechoic)
108 dB with THP 30 Transformer (Half-space)
107 dB @ 8 (Anechoic)
110 dB @ 8 (Half-space)
Nominal 6 ohm
Minimum 4 ohm
3.52
4.44
3.40
10.30
10.81
11.95
2.25
2.78
2.19
10.73
12.06
15.67
1 x 5" (130mm) full range, ICT™ Point Source
4.21 litres, vented with integral steel back can
White
3.11 kg
Can height: 187mm (204mm including tie-back ring)
Baffle Diameter: 240mm
Back can diameter: 208mm
210mm
C Ring (optional)
Tile Bridge (optional)
Plaster Ring (optional)
17