Equalisation; Dimensions - Tannoy CMS50 User Manual

7. Equalisation

The CMS50 ICT is designed to need no equalisation or correction to overcome
system limitations. As a result, it will only need equalisation to compensate for difficult
acoustic environments.
Excess equalisation can reduce system headroom, and introduce phase distortion
resulting in greater problems than it cures. If equalisation is required then it should be
applied gently and smoothly. Violent equalisation will be detrimental to the overall
sound quality. If the loudspeakers were being used consistently at high levels it would
be beneficial to introduce a high-pass filter at 50Hz to protect the loudspeaker from
any unnecessary subsonic frequencies

8. Dimensions

15