Table of Contents
Advertisement
A+ SERVER 2022TG-HTRF/HIBQRF User's Manual
6-9
Adapter Card Replacement
Each motherboard drawer comes equipped with an adapter card which plugs into
the backplane. In the unlikely event that the adapter card needs to be replaced,
installation requires only a Phillips head screwdriver.
Removing the Adapter Card
1.
Disconnect the wiring connecting the adapter card to the motherboard.
2.
Remove the motherboard drawer from the chassis.
3.
Remove the motherboard from the motherboard drawer by removing the
screws securing it to the drawer. Set the screws aside for later use.
4.
Remove the fi ve screws securing the adapter card and the spacer plate to the
drawer and set them aside for later use.
5.
Remove the adapter card and spacer plate from the motherboard drawer.
6.
Set the spacer plate aside for later use.
Installing the Adapter Card
1.
Place the adapter card and spacer plate in the motherboard drawer,
aligning the holes in the spacer and the adapter card with the holes in the
motherboard drawer.
2.
Secure the adapter card and spacer plate to the motherboard drawer, using
the fi ve screws which were previously set aside.
3.
Reconnect the wiring from the motherboard to the adapter card.
Figure 6-12. Adapter Card Installation
Adapter Card
Motherboard
Drawer
6-12
Spacer Plate
Five Screws
Advertisement
Table of Contents
