Table of Contents
Advertisement
4-4
Drive Carrier LEDs
The server chassis uses SATA drives.
SATA Drives
Each SATA drive carrier has two LEDs.
•
Green: Each Serial ATA drive carrier has a green LED. When illuminated, this
green LED (on the front of the SATA drive carrier) indicates drive activity. A con-
nection to the SATA backplane enables this LED to blink on and off when that
particular drive is being accessed.
•
Red: The red LED to indicate an SATA drive failure. If one of the SATA drives
fail, you should be notifi ed by your system management software.
SCSI Drives
This chassis does not support SCSI drives at this time.
Chapter 3: System Interface
3-3
Advertisement
Table of Contents
