Appendix C System Specifi Cations - Supero A+ SERVER 2022TG-HTRF User Manual

High-end server
Hide thumbs Also See for A+ SERVER 2022TG-HTRF:
Table of Contents

Advertisement

Appendix C: System Specifi cations
Appendix C
System Specifi cations
Note: Unless noted specifi cations apply to a complete system (all serverboards).
Processors
Dual AMD Opteron 6100 series processors (Socket G34 type)
Note: Both CPUs must be of the same type.
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
AMD SR5670/SP5100 Chipset
BIOS
®
16 Mb AMIBIOS
SPI Flash ROM (each serverboard)
Memory Capacity
Sixteen (16) single/dual/tri/quad channel DIMM slots supporting up to 256 GB of
DDR3-1333/1066/800 registered ECC or 64GB of DDR3 Unbuffered ECC/non-
ECC SDRAM
Note: Interleaved memory - requires memory must be installed four modules at a time. See
Section 5-6 for details.
SATA Controller
On-chip (SP5100) SATA controller supporting three (3) SATA HDD (RAID 0 and
1 supported) (each serverboard)
Drive Bays
Twelve hot-swap drive bays to house twelve SATA drives (3 for each node)
Expansion Slots
Total of four PCI-Express x16 low-profi le slots on serverboards (one for each
serverboard)
C-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

A+ server 2022tg-hibqrf

Table of Contents