Adjusting The Needle Up Stop Position - Brother S-7000DD Instruction Manual

4-5. Adjusting the needle up stop position

1
(While pressing the
Selecting "UPoS"
2
(Setting item)
Needle up stop position setting
3
4
5
* For details on other adjustment items, refer to the Service Manual.
key , turn on the power switch.)
(1)
(Press once)
(Setting value)
Becomes higher
Becomes lower
(Setting item)
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
"MorG" will appear in the display (2).
・ If the D
will increase and the needle up stop position
Example
will become lower.
・ If the C
will decrease and the needle up stop position
will become higher.
・ The setting range is from –5 to 10.
NOTE:
A setting value of "10" corresponds to an
angle of rotation of approximately 10 for the
upper shaft.
The setting will be stored and the display will
return to the setting item.
Normal sewing machine operation will then be
possible.
S-7000DD
key is pressed, the setting value
key is pressed, the setting value
0528D 0529D
0526D
0527D
0530D
0520D
24