Lifecycle Recumbent Bikes LC95R, LC91R, LC85R, R9, R7, 95Ri, 93Ri, 90R, and 95Re
OPTIONAL SETTINGS - WATTS PROGRAM ENABLE/DISABLE
W A T T D I S P L A Y O F F
If this option is enabled, the MESSAGE CENTER displays the Watts equivalent of the workload. This message will
only be displayed after a level change.
The DOWN ARROW will turn OFF the WATTS PROGRAM.
The UP ARROW will turn ON the WATTS PROGRAM.
The ENTER key LED indicates when the value is at the default setting of WATTS PROGRAM ON.
The value is stored in EEPROM and is kept when the bike is not in use.
Press the ENTER key to advance to the next diagnostic state. Press the CLEAR key to the previous diagnostic
state, or repeated pressing to exit diagnostics.
25