Touch Screen Assembly - Life Fitness LC9500R Service Manual

Lifecycle Recumbent Bikes LC95R, LC91R, LC85R, R9, R7, 95Ri, 93Ri, 90R, and 95Re
How To... Replace the Touch Screen Assembly
Special Service Tools Required: NONE
CAUTION! BEFORE REPLACING CIRCUIT
BOARD(S), GROUND YOURSELF TO EARTH
GROUND USING AN ANTI-STATIC GROUND STRAP.
1. Remove the console from unit refer to Display
Console and Accessory Tray Removal.
2. Remove seven screws from the Back Cover.
3. Remove the Single Board Computer. See "How To
Replace the Single Board Computer" in this section.
4. Remove the Interface Board. See "How To Replace
the Interface Board" in this section.
5. Remove the Inverter Board. See "How To Replace
the Inverter Board" in this section
6. Remove four screws securing the Touch Screen
Bracket Assembly to the bezel Assembly. Remove the
Touch Screen Assembly from the Console.
7. Remove the four nuts securing the LCD/touch screen to
the bracket then separate the bracket from the
assembly.
8. Install new Touch Screen in reverse order.
Front
Cover
Touch
Screen
Screws
Touch
Screen
44
Touch Screen
Assembly
Mounting
bracket
Single Board
Computer
Touch
Screen
Screws
Interface
Board
Polar
Cable