Viewing Photo Or Slide Show - BenQ MK2443 Quick Start Manual

Table of Contents

Advertisement

Viewing Photo or Slide Show

Basic Operating Instruction
1. Press ◄ or ► to choose PHOTO icon, then press OK to select.
2. Press ▲ or ▼ to choose the sub-folder if necessary, then press OK to enter the folder.
3. Press ▲ or ▼ to move the light-bar cursor, the photo preview will be shown.
Supported Media File
This TV can only support JPEG and BMP files for Photo.
Photo with higher resolution (higher than 1920x1080) will be downscaled accordingly.
Play a Slide Show within a folder
1. Follow the instruction above to enter the desired sub-folder.
2. Press
to start the slide show.
3. Photos will be changed every 5 seconds.
4. After every photo is displayed, the slide show will be resumed and start from the first photo.
5. You may start the slide show from your desired photo by moving the light-bar cursor to the
desired file then press
6. You may Pause/ Resume; Jump to next/previous, Rotate 90° clockwise, Zoom the current
displayed photo.
Perform a Slide Show with only selected files
1. Follow the instruction above to enter the desired sub-folder.
2. Press ▲ or ▼ to choose the photo. Then press OK to select the photo. The
appear to the left of the selected photo.
3. Press ▲ or ▼ again to choose another photo. You may repeat this step until all desired
photos are selected.
4. Press ▲ or ▼ and select "UP Folder" to exit the current folder. You may enter other sub-
folders to select photos for the slide show.
5. Once all photos are selected, press
6. You may Pause/ Resume; Jump to next/previous, Rotate 90° clockwise, Zoom the current
displayed photo.
7. All selected photos will be unmarked once changing source and turning off the TV.
.
to start the slide show.
mark will
Media Play - USB Device
47

Advertisement

Table of Contents
loading

Table of Contents