User Arms - Life Fitness 8500 Service Manual

Life Fitness Model 8500, 9100, and 9500HR Cross-Trainers
How To... Replace The User Arms
Tools required: Allen wrench set and Phillips screwdriver
1. MODELS 8500 and 9100: Raise the BOOT COVERS on the UPPER
ARMS.
MODEL 9500: Remove four(4) mounting bolts from the USER ARM
REAR COVERS and remove these covers.
2. Remove three(3) MOUNTING BOLTS from each UPPER ARM and lift
off the user arm. Units with Heart Rate, disconnect electrical
connector.
3. Install new user arms in reverse order.
User Arm
Cover Screws
User Arm
Front Covers
Model 9500
18
Boot
Cover
User Arm
Rear Covers
Model 9500HR
Model 8500/9100
Lockwashers
2-pin Connector
Rocker Arm
User Arm
Hex Head
Cap Screws