(Display Lock Equipped Model Only) - Life Fitness 8500 Service Manual

Life Fitness Model 8500, 9100, and 9500HR Cross-Trainers
DIAGNOSTIC STATE 3 - Code Version and RPM, Networking, and LDC
Tests

(DISPLAY LOCK EQUIPPED MODEL ONLY)

179
170
162 153
145 136
128
120 117
114
111 108
105
102
10 20 30 40 50 60 7 0 80 90 100
A G E
Life Fitness USA: 1-800-735-3867
Life Fitness Intl.: (+1) 847-288-3300
Life Fitness UK: (+44) (0)1353 666017
The items displayed for selection are Code Version, RPM, Networking, and Load Duty Cycle (LDC).
Code Version will be displayed under the TIME segment and will be a four(4) digit number. Press the DISPLAY LOCK
key or the "8" key (CT9500) to access software part number xxxx-xxxxx-xxxx. To go back to the original diagnostic
screen press the DISPLAY LOCK key or the "8" key (CT9500).
To verify the RPM signal, pedal and observe RPM value.
While pedaling, press the ARROW keys to verify the alternator LOAD DUTY CYCLE. Using the UP ARROW, increase
load resistance from 0 to 250. Zero (0) equals a no Load Duty Cycle (LDC) state. 250 equals 100% of LDC. The Load
Duty Cycle value will be located under the HEART RATE and DISTANCE segment.
The status of the LIFELINK board and LIFECENTER connection will be displayed in the CALORIES window. The
following message will be displayed:
NOTE: Use the PAUSE and QUICK WORKOUT keys to increment and decrement the LDC value by 10%
(CT9100/8500 feature).
Press the CLEAR key to return to Diagnostics State 2.
Press the ENTER key to advance to Diagnostics State 4.
Time RPM
®
119
111 102
85%
80%
65%
99
96
93
60%
NONE = No LIFELINK board detected
NULL = Board detected but not communicating
ON = Online status with Life Center
OFF = Offline status with Life Center
Level
Calories
Quick Start:
Press 'Start'
Press 'Quick Workout'
Heart Rate Cal/Hour
Distance Watts
1 2 3
Clear
Pause
4 5 6
Quick
Workout
7 8 9
Display
Lock
0
Start
Start
Aerobics Reverse
Mode Mode
Enter
Enter Enter
7