Rocker Arms - Life Fitness 8500 Service Manual

Life Fitness Models 8500, 9100, and 9500HR Cross-Trainers
How To... Replace Rocker Arms
Tools required: 3/8 Socket set and Standard wrench set
1. Remove the UPPER ARMS. See How
To...Replace User Arms.
2. Remove the MONOCOLUMN COVERS and
CLEVIS COVERS.
3. Remove the clevis cover from each pedal lever.
4. Remove the nut and bolt securing the PEDAL
LEVER to the ROCKER ARM, and lower the
pedal lever.
5. Remove the END CAP from the rocker arm.
6. Remove bolt and washer and slide-off the rocker
arm.
7. Install new rocker arm in reverse order.
8. Units with split collar design, make sure to position to within .005" gap of rocker arm. Units with one-piece collars,
make sure collar is positioned against shaft shoulder.
Shaft
Shoulder
Torque
30-35 ft lbs
Flat Washer
Rocker
Arm
Rocker
Arm
One-Piece
Collar
Flat Washer
Torque
30-35 ft lbs
Rocker Arm
Torque
30-35 ft lbs
Flat Washer
Rocker
Arm
End Cap
Torque
30-35 FT. LBS.
Bolts(2)
Pedal Lever
Rocker
Arm
Shaft
Split Collar
Flat Washer
Torque
30-35 ft lbs
Rocker Arm
Clevis
Covers
13