Pedal - Life Fitness 8500 Service Manual

Life Fitness Model 8500, 9100, and 9500HR Cross-Trainers
How To... Replace Pedal
Tools required: Clean cloth, water, and isopropyl alcohol
1. Remove the pedals from the pedal arm assemblies.
2. Remove old tape.
3. Using a clean cloth, carefully clean the surface
areas using a misture of 50% water and 50%
isopropyl alcohol. Make sure all adhesive is
removed from the pedal and pedal arm assembly
and make sure that surface areas are perfectly
dried.
4. Apply four(4) pieces of double-back adhesive tape
the pedal arm assembly as shown.
5. Reinstall the pedal and apply 30-40 psi clamp
pressure for approximately 60 seconds or longer.
26

Pedal

Arm
Assembly
on
Double-back
Adhesive
Tape (4 pieces)