Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-XW300 Owner's Manual

Video Input

Input Source Selection (Video, S-video)

Direct Operation
Choose Video or S-video by pressing the VIDEO or the
S-VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
press the SELECT button.
or
3
Use the Point
then press the Point
items. Use the Point
and then press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-video
VIDEO jack, select S-video.
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.44).
36
buttons to select Input and
the SELECT button.
or
buttons to select Video and then
buttons to select Computer 1. And
button to access the submenu
buttons to select the S-video
Remote Control
VIDEO button
S-VIDEO button
Input Menu
or
Computer
1
Video
S-video