Information - Sanyo PLC-XW300 Owner's Manual

Chapter 4 Controlling the Projector
Items
Input
System
Signal
Screen
Lamp status
Security
PJ time(h)
Lamp Corres. Value(h) Displays the use time (Corresponding value) of the lamp.
Filter time(h)
Indication of the lamp status
Icon display/background Status
White/Blue
White/Red
Gray/Blue
Gray/Red
Red/Blue with X
Red/Red with X
42

Information

This page is to display the basic information of the projector status. Click
Information on the main menu.
Description
Displays selected input and source.
Displays selected signal system.
Input signal status (Yes, No)
Displays screen mode.
Displays lamp status with an icon. Refer to the table as shown below.
Displays the security (PIN code lock) status (Yes, No)
Displays the accumulated use time of the projector.
Displays the accumulated use time of the filter.
Lamp on (Normal)
Lamp on (Lamp is being used over a specified use time, replace lamp
immediately)
Lamp off (Normal)
Lamp off (Lamp is being used over a specified use time, replace lamp
immediately)
Lamp failure (Lamp failure, check lamp condition)
Lamp failure (Lamp failure and lamp is being used over a specified use
time, replace lamp immediately)
Click this button to
update the information.