Video System Selection - Sanyo PLC-XW300 Owner's Manual

Video Input

Video System Selection

1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
Select Video, S-video or Computer 1(Component)
2
input source. (See pages 36-37)
Use the Point
3
press the Point
buttons to select the desired system and then
press the SELECT button.
Video or S-video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
38
buttons to select Input and
or the SELECT button.
buttons to select System and then
or the SELECT button. Use the Point
AV System Menu (Video or S-video)
System Video
AV System Menu (Component)
Component