Network Pin Code; Network Information - Sanyo PLC-XW300 Owner's Manual

Chapter 2 Setup Procedures

Network PIN code

The Network PIN code is to restrict the access from the networks to the projector.
After setting the Network PIN code, you need to enter it to operate the projector via the
networks.
1. Select "Network PIN code" in the Network menu, and press SELECT button.
The Network PIN code screen will appear.
2. Set the Network PIN code.
Set the figures with the Point buttons and move to the next items with the Point
buttons. Select "Set" and press SELECT button to set. To cancel the preset Network PIN
code, select "Cancel". When you do not want to set the Network PIN code, set "0000".
It is recommended to set the Network PIN code if you use the projector via the networks.
The Network PIN code can be set also through the networks. See "3. Basic setting and
operation" "Initial setting" "Network PIN code setting" (p.23).
Network PIN code
Network PIN code screen

Network information

Select "Network information" in the Network menu and press Point or SELECT button
to show LAN setting environment of the currently selected projector. (The description
below is an example and different from what will be shown.)
14