Setting 1; Setting 2 - Sanyo PLC-XW300 Owner's Manual

Chapter 4 Controlling the Projector

Setting 1

Item Description
Language..............Sets the language display of projector's
Auto setup ...........Executes the Auto PC Adj, and Input
Auto PC Adj. .....Sets Auto PC Adjustment mode. (ON,
Input search .....Sets the auto-input signal detection
Auto keystone ....Sets Auto Keystone mode. (Auto, Manual,
Background.........Sets the screen background when no signal input. (Blue, User, Black)
Display....................Switches on or off the on-screen menu display on the screen. (OFF, Countdown Off,
Logo .........................Sets on or off the logo display on the screen during the startup. (OFF, Default, User)

Setting 2

Item Description
Ceiling.....................Sets the image top/bottom and left/
Rear...........................Sets the image left/right reversed. (ON,
Terminal.................Sets the COMPUTER IN 2/MONITOR OUT
Power
management .....Sets into the selected power manage-
On start ..................Sets the power-on mode when the AC cord is connected to the outlet.
Lamp control......Selects lamp control mode. (High, Normal, Eco)
Lamp life
control ....................Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds
40
on-screen display menu.
Search function below according to the
each setting after clicking
OFF)
mode. (ON1, ON2, OFF)
OFF)
ON)
Countdown off .......Displays image during the starting up.
right reversed. (ON, OFF)
OFF)
terminal to COMPUTER 2 or Monitor Out.
ment mode (Ready, Shutdown, OFF) if
the input signal is interrupted and no
control key is pressed for the specified
period of time.
*The specified time can be set 1 to 30 min.
the recommended total hours of use.
Start
button.