Image Adjustment - Sanyo PLC-XW300 Owner's Manual

Video Input

Image Adjustment

1
Press the MENU button to display the On-Screen
Menu. Use the Point
adjust and then press the Point
button.
2 Use the Point
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point button to decrease the contrast; press the
Point button to increase the contrast (from 0 to 63).
Brightness
Press the Point button to decrease the brightness; press
the Point button to increase the brightness (from 0 to 63).
Color
Press the Point button decrease the intensity of the color;
press the Point button increase the intensity of the color
(from 0 to 63).
Tint
Press the Point
proper color balance (from 0 to 63).
Color temp.
Use the Point buttons to select the desired Color temp.
level (High, Mid, Low, or XLow).
White balance (Red)
Press the Point button to lighten red tone; press the Point
button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point
Point button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point
Point button to deepen blue tone (from 0 to 63).
Note:
White balance Red, Green or Blue is adjusted, the Color temp. level will change to User.
Blackboard(Green) or Colorboard is selected in Image select, Color temp. will change to
Blackboard or Colorboard.
40
buttons to select Image
or the
buttons select the desired item
buttons to adjust the tint value to get a
button to lighten green tone; press the
button to lighten blue tone; press the
Image Adjust Menu
SELECT
buttons to
PAL, SECAM, PAL-M or PAL-N (p.38).
Reset
Store
Selected Image mode
Reset
Store
Use the Point
buttons to adjust the
setting value.