Table of Contents
Advertisement
IP Camera Web-Client
Alarm and Audio
Alarm Settings
58
Note
To disable a zone, click the VMD drop-down menu, then select Disable.
Figure 4-15
Audio and IO Settings Tab
Connect external devices such as sirens or flashing lights to the alarm output connector to
signal camera users that an alarm is activated. Set the Alarm Output as Normally Open or
Normally Close. See
Connecting Alarms
When alarm inputs are connected, the camera triggers an alarm only when the normal state
(open or closed) changes. An alarm message appears on the Web-Client screen (see
Figure
4-13) to notify the operator.
on page
20
for more information.
Advertisement
Table of Contents
