Wireless Configuration - Microweb PRO SERIES User Manual

Synchronized with NTP Server
The camera automatically configures the date and time through the NTP (network time protocol) server.
The NTP server is based on Greenwich time. Select the NTP server, IP address and time zone to set
the date and time automatically, then click "submit."
NOTE: If this procedure doesn't work, it could be due to a network error. Select another NTP server
and IP address or set the date and time manually. Once the date and time configuration is set, you
don't have to configure it again.
. NTP Server: The standard public or private NTP server IP address.
. Time Zone: Select the appropriate time zone as per the camera location.
. Update Interval: The update time interval for updating/synchronizing the camera time with
the NTP server.
Set Manually
Enter the date and time manually, then click "submit."
Enable Daylight Saving
Enter the dates you want to start/end Daylight Saving Time.
Reboot (Restart) Network Camera
This option will reboot or restart the camera. Your settings will not be lost.
Restore Factory Default Values
This option will restore the default factory values.
6.7 Wireless Configuration (for wireless cameras only. Model: MNC-WXXX)
This screen is used to configure wireless settings to match your access point for a wireless network
connection.
45