Microweb PRO SERIES User Manual page 42

Trigger Output
This is to configure digital output states and control script. The Pro Series Network Camera sends
captured images via e-mail or an FTP server when connected external sensors detect events.
Supply voltage to output port for xxx seconds.
This is to supply voltage to the output port when events are triggered. (This option is only activated
when you select the "Activation of digital output" option in the "Trigger Condition" section.) During
the activation period, which you can specify in seconds, the camera provides power to the GPIO
connector in pins 3 and 4 – see Appendix F.
Send alarm to ETSP client:
By checking the box, an alarm will be sent to the ETSP client when the events are triggered. Refer
to Section 9 for instructions on the ETSP client.
Send captured image to e-mail:
This is to designate a person to receive captured images via e-mail through the SMTP server. You
may configure the SMTP server and e-mail address as desired.
Send captured image to FTP server:
This is to send captured video from the camera when an event is triggered. Enter an FTP server IP
address, user ID and password, and select a directory to save video.
42