Microweb PRO SERIES User Manual page 22

router, and you will not be able to see the live image of the camera. A blocked image transfer port is
the most common cause for display problems.
As a rule: Whenever you can see the login page in your Web browser but no live video shows up on
the main camera live screen, you should activate this option.
ActiveX Installation for MS Explorer Users (automatic)
The first time you login to the camera using ActiveX, you are notified that a required plug-in / ActiveX
control is required. You need to allow the installation of ActiveX by clicking "Yes" to the question "Do
you want to install the program?" on the pop-up window. The installation will then take place. It is
normal for this process to take up to 30 seconds. After the installation you will be taken to the Network
Camera Homepage. If you do not see the message concerning the ActiveX installation, this can have
different causes:
- you are not logged in to your computer as an administrator
- the security settings on your system (Internet Options) prevent the installation of signed
ActiveX controls
ActiveX Installation for MS Explorer Users (Manual installation)
If the ActiveX program fails to install automatically, you can install it manually. Administrator rights
are still required.
First you need to download M4Viewer.exe from the Web site www.networkipcam.com . You can find
the link on the login page of the camera as shown below.
Save M4Viewer.exe on the computer's hard drive.
22