Network Configuration - Microweb PRO SERIES User Manual

Auto White Balance
Enable or disable Auto White Balance. If set to "disable," you can manually control the amount of red,
green and blue color in the input fields below.
Saturation
Set the saturation value of images. Higher saturation values generate deeper colors (input values
ranging from 0 to 9).
Sharpness
This value lets you control the sharpness of the image. Lower values generate a smoother image;
higher values generate a crisper image.

6.3 Network Configuration

This screen defines the network type and addresses of the camera. Here you can configure the
camera's IP address, the DNS server address and the SMTP server IP address.
Set IP address, Subnet Mask, Gateway Address
To set the IP address, subnet mask and gateway address manually, select "manually" in the combo
box. If you have any trouble configuring network system information, contact your network
administrator. Knowledge about IP addresses and TCP/IP is required for the configuration task.
Set DHCP
When selecting "using DHCP," the IP address, subnet mask address and gateway address are being
obtained from a DHCP server. Users in a local network area may check the IP address through IP
Installer.
35