Table of Contents
Advertisement
Setting up the telephone
Connecting the telephone
The connection sockets for the handset and connection cord are located on the base of
the telephone. Connect the handset first, then plug the telephone in to the jack.
Connecting the handset
The connectors at both ends of the spiral cord are the
same size.
Plug the connector at the longer, straight end of the
1
cord into the socket on the telephone based
marked
2
with the handset symbol.
Press the cable into the cable duct
. To do this, use a
flat, thin object to press the cord under the grips.
Plug the connector at the other end of the spiral cord into the socket on the handset.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the Classic A21 ISDN and is the answer not in the manual?
Questions and answers