Tools Needed For Assembly; Carton Contents - Porter-Cable PCB375SS Instruction Manual

TOOLS NEEDED fOR ASSEMBLY

Supplied
3 mm hex key
Not Supplied
Slotted screwdriver
# Phillips screwdriver
Adjustable wrench
3 mm wrench

CARTON CONTENTS

UNPACKING AND CHECKING CONTENTS
Carefully unpack the scroll saw and all its parts, and
compare against the list below and the illustration on the
next page. With the help of an assistant place the saw
on a secure surface and examine it carefully.
WARNING
!
● To avoid injury from unexpected starting or
electrical shock, do not plug the power cord
into a source of power during unpacking and
assembly. The cord must remain unplugged
whenever you are adjusting/ assembling the
scroll saw.
● The scroll saw is heavy and should be lifted with
care. If needed, get the assistance of someone to
lift and move the scroll saw.
● If any part is missing or damaged, do not attempt
to assemble the scroll saw, or plug in the power
cord until the missing or damaged part is
correctly replaced.
TABLE Of LOOSE PARTS
ITEM DESCRIPTION
A. Scroll saw assembly
B. Blade bag
5 in. pin-end blade
3 mm hex key
STAND
C. Side bracket - upper support
D. Side bracket - lower support
E. Rear bracket - upper support
Rear bracket - lower support
f. front bracket - upper support
front bracket - lower support
G. Stand hardware bag
Cushion
Serrated toothed hex.
flange nut
Cap hd. sq. neck bolt
Hex. bolt
flat washer
Sleeve
H. Stand leg
8
QUANTITY









4
0
4
4
4

4