Tools Needed For Adjustment; Carton Contents - Porter-Cable PCXB340SS Instruction Manual

TOOLS NEEDED FOR
ADJUSTMENT
Supplied
2.5 mm hex key
3 mm hex key
Not Supplied
Slotted screwdriver
#2 Phillips screwdriver
Adjustable wrench
13 mm wrench

CARTON CONTENTS

UNPACKING AND CHECKING CONTENTS
Carefully unpack the scroll saw and all its
parts, and compare against the list below and
the illustration on the next page. With the help
of an assistant place the saw on a secure
surface and examine it carefully.
WARNING
!
●
To avoid injury from unexpected
starting or electrical shock, do not
plug the power cord into a source
of power during unpacking and
assembly. The cord must remain
unplugged whenever you are
adjusting/assembling the scroll saw.
●
The scroll saw is heavy and should
be lifted with care. If needed, get the
assistance of someone to lift and
move the scroll saw.
●
If any part is missing or damaged, do
not attempt to assemble the scroll
saw, or plug in the power cord until the
missing or damaged part is correctly
replaced.
TABLE OF LOOSE PARTS
ITEM
A. Scroll saw assembly
B. Blade bag
Plain-end blade
Blade adaptors
2.5 mm hex key
3 mm hex key
9
DESCRIPTION Q'TY
1
1
2
1
1