Connecting I/O Devices - ECS KM400-M2 Manual

22

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:
PS2 Mouse
PS2 Keyboard
Parallel Port (LPT1) Use LPT1 to connect printers or other parallel communications
Serial Ports(COM1) Use the COM1 port to connect serial devices such as mice or
VGA Port
LAN Port
USB Ports
Audio Ports
This concludes Chapter 2. The next chapter covers the BIOS.
Use the upper PS/2 port to connect a PS/2 pointing device.
Use the lower PS/2 port to connect a PS/2 keyboard.
devices.
fax/modems.
Connect your monitor to the VGA port
Connect an RJ-45 jack to the LAN port to connect your com
(optional)
puter to the Network.
Use the USB ports to connect USB devices.
Use the three audio ports to connect audio devices. The first jack
is for stereo line-in signal. The second jack is for stereo line-out
signal. The third jack is for microphone.
Installing the Motherboard