Download Print this page
Valcom IP Solutions VIP-802 Manual
Valcom IP Solutions VIP-802 Manual

Valcom IP Solutions VIP-802 Manual

Dual networked page zone extender

Advertisement

Quick Links

DUAL NETWORKED PAGE ZONE EXTENDER
INTRODUCTION
The VIP-802 Dual Networked Page Zone Extender
enables voice access to two zones of one-way
paging over an IP-based LAN/WAN. This allows
page zone extension anywhere on the network.

SPECIFICATIONS

Features
• 2 Audio Outputs
• 2 Audio Inputs
• 2 Form A relay contacts
• 2 Contact Closure Inputs
• RJ-45 for network connection
• Front panel activity LED
• Provides audio for up to 150 Valcom one-way
amplified speaker assemblies
• AUX audio input via RCA jack
• Contact closure or VOX operation of audio
input
• Removable screw terminal connectors
provided for audio and relay interface
• Page with music output, music mutes during
page
• Output control contact closure provided
during paging output
• Compatible with 25 or 70 Volt amplifiers
• 2.5mm jack for DC power
• Power over Ethernet 802.3af Compliant
Dimensions/Weight
• 1.75 H x 6.75" W x 9.5" D
(4.45cm H x 17.15cm W x 24.13cm D)
• Weight: 1.75 lbs. (0.80 kg)
VIP-802
Nominal Specifications
Input Impedance:
Input Level:
Voice Switch Sensitivity:
Music Source Input Impedance: 8 to 600 Ohms
Music Input Level:
Output Impedance:
Output Level:
Relay Current:
Nominal Power Requirements
Via back panel barrel connector:
Voltage:
Current:
Via 802.3af PoE Ethernet Switch:
802.3af:
Environment
Temperature:
Humidity:

Packing List

Qty
1
1
1
2
4
6
3
2
1
ISSUE 1
600 Ohms
-10dBm nominal
-10dBm nominal
50 Ohms
- 10dBm nominal
1 AMP @ 24VDC
0 to +40° C
0 to 85% non-precipitating
Item
VIP-802
VIP-101 Setup CD
VSP Document
Mounting Brackets
Rubber Feet
Wood Screws
RJ-45 Patch Cables
RJ-45 Terminal Blocks
947987
-21dBm
24VDC
325mA
Class 3

Advertisement

loading

Summary of Contents for Valcom IP Solutions VIP-802

  • Page 1: Specifications

    - 10dBm nominal • Front panel activity LED Relay Current: 1 AMP @ 24VDC • Provides audio for up to 150 Valcom one-way amplified speaker assemblies Nominal Power Requirements • AUX audio input via RCA jack Via back panel barrel connector: •...
  • Page 2: Power Connections

    Rack: Following the assembly drawing, attach the system such as a key system or PBX system, two mounting ears to the VIP-802 unit. Using rack these units are interfaced to the system via a screws, mount the VIP-802 in an available 1U rack fully protected page port or system central slot.
  • Page 3 This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Valcom, Inc. be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation or use of the product.