On/Off Switch - Life Fitness 9000 Service Manual

Life Fitness Model 8500/9000 Treadmill
HOW TO ... REMOVE AND REPLACE THE AC LINE CORD
Tools Required: Phillips screwdriver
Step 1
Turn the power OFF at the ON/OFF switch and then unplug the unit from the electrical outlet.
Step 2
Remove the four SCREWS securing the MOTOR COVER and set aside.
Step 3
Using a pair of pilers, grasp the STRAIN-RELEIF securing the AC LINE CORD to the MOTOR PAN and carefully
pull the AC LINE CORD out of the MOTOR PAN (the STRAIN RELIEF on the model 9000 treadmill is located on
the bottom of the MOTOR PAN).
Step 4
Depress the top and bottom tabs securing the ON/OFF SWITCH to the MOTOR PAN and carefully remove the
ON/OFF SWITCH from the front of treadmill.
NOTE: TAKE A MOMENT TO NOTE THE LOCATIONS OF THE CONNECTORS
Step 5
Remove the two AC LINE CONNECTORS from the ON/OFF SWITCH and remove the GROUNDING SCREW from
the MOTOR PAN.
Step 6
Place the new AC LINE CORD in position and reverse steps 1 through 5 to return all parts to their proper locations.
Load
Black
AC Line In
Black
PRIOR TO UNPLUGGING THEM FROM THE SWITCH.
Load
White
AC Line In
White
Switch
Switch Tab
AC Line
Connectors
13