Life Fitness 9000 Service Manual page 23

Life Fitness Model 9000 Treadmill
DIAGNOSTIC TESTS
How To...EXECUTE THE EEPROM MODE
This test indicates the amount of memory and allows for changes in the program times.
TO ENTER INTO THE TEST TURN "ON" THE HILL, RANDOM AND FIT TEST PROGRAM KEYS.
The information that will be displayed in this mode is as follows:
± Statistics and software code version will be displayed in the INSTRUCTIONS window.
± Speed encoder count displayed in CALORIES window.
± Speed pulse count displayed in MILES (KILOMETERS) window.
± Software options are displayed in INSTRUCTIONS window.
± Optional settings displayed in the INSTRUCTIONS window.
You may change Program times by pressing the ENTER key when the Program time is indicated on the
INSTRUCTIONS window. Default time is set at 60 Minutes and can be reset from 1 to 99 Minutes.
You may change the maximum programmable belt speed by pressing the speed INCREASE and DECREASE keys
when the MAXIMUM SPEED message is displayed in the INSTRUCTIONS window. The choices for maximum belt
speeds are 10.0 mph (11.6 kpm) to 2.0 mph (3.22 kph) in 0.5 mph (0.805 kph) increments.
You may change the minimum speed between 1.0 mph (1.61 kph) and 1.5 mph (2.415 kph) using the speed
INCREASE and DECREASE keys.
Press the CLEAR key to exit the Diagnostic Program or press Program keys to enter another Diagnostic/Accounting
function.
3