Appendix B: Interface; B-1. Serial Interface - Fujitsu FP-410 User Manual

Appendix B: Interface

B-1. Serial Interface

Specifications of transmission interface
Applicable line
Transmission speed
Communication system
Synchronization system
Connection method
Transmission code type
Transmission code
format
Transmission sequence
Transmission code
system
Error control
Maximum connection
line length
Input/output circuits
Protocol
Leased direct line
2400,4800,9600,19200,38400,57600 bps
(Specified at setup)
Full duplex
Start-stop type
Asynchronous response system
7-bit or 8-bit code
Start bit length: 1 bit, Stop bit length: 1 bit
Data bit length: 7 or 8 bits (specified at setup)
Parity bit: NONE, ODD, EVEN (specified at setup)
Mark (1)
ST b0 b1 b2 b3 b4 b5 b6 b7 SP
Space (0)
LSB first system
JIS code
Parity check (specified at setup)
15 m (for power supplied via AC adapter) or 2 m (for power
supplied via interface connector)
Input: Equivalent to MAX211
Output: Equivalent to MAX211
DSR/DTR, XON/XOFF (specified at setup)
44