Conditions For Use - Fujitsu FP-410 User Manual

8. Conditions for Use

(1) High-duty printing might cause blurred printing. Use an
appropriate duty that does not cause blurs.
(2) To print an external character set, a bold font (e.g., Gothic) or bold
lines should be selected. If a fine font (e.g., Mincho) or fine lines
are selected, the print density might be insufficient.
(3) To prevent enlarged or reduced printing due to uneven feeding
after cutting paper or stopping printing, the paper must be
advanced at least 1 mm (8 dots) before printing resumes.
(4) Characters printed in red or blue of dual-color, thermal paper are
less durable.
(5) When dual-color, thermal paper is used, a bold font (e.g., Gothic)
should be selected. If a fine font (e.g., Mincho) is selected, the
print color might become faint. In this case, the print duty must
not exceed 30%. A print duty of greater than 30% might make
the black print faint.
(6) Do not use this printer outdoors. Use of this printer outdoors
might cause a printer malfunction.
(7) Use only the specified thermal paper. If other non-specified
paper is used, the print quality may deteriorate, the thermal print
head and cutter life may be shortened, or the printer may fail.
(8) To print on cardboard with a thickness of 90µm, set the cutter
drive function to the cardboard mode during printer setup.
Printing cardboard in the standard cutter drive mode might cause
a cutting error.
(9) The Paper Near-End state is only detected if a paper roll with an
outside core diameter of 18 mm and 22.2mm is used. If a paper
roll with an outside core diameter of 32 mm is used, the paper
near-end state is not detected.
(10) When you use 58mm width for long period, a part of head may
be worn out because this part has been directly touched on
Platen Roller. This may cause the print error. Also, Cutter may
be worn out by the same condition as Head, and this may cause
Cut Error. When you use 80mm width paper after 58mm width
paper used for long period, we recommend you to replace these
parts. If you need, please purchase and replace these parts.
18