Fujitsu FP-410 User Manual page 46

RS-232C connector
Pin No. Signal
name
1 FG
2 TXD
3 RXD
4 RTS
5 CTS
6 DSR
7 SG
8 to 12 N.C.
13 SG2
14 SG2
15 to 17 N.C.
18 +24V
19 +24V
20 DTR
21 to 24 N.C.
25 INIT
Notes:
1. To supply power from the power connector, do not connect the pins
shaded( )in the above table.
2. Use inch- screws to secure the connection.
13 12 11
25 24
I/O
direction
-- Frame ground
Output Send data
Input Receive data
Output Send request
Input Send permission
Input Data set ready
-- Signal ground
-- Unused
Input +24 V ground
Input +24 V ground
-- Unused
Input Power supply for mechanism drive
Input Power supply for mechanism drive
Output Data terminal ready
-- Unused
Input Forced reset
10 9 8 7 6
23 22 21 20 19 18
Connecting side
45
Function
5 4 3 2 1
17 16 15 14