Fujitsu FP-410 User Manual page 57

MEMORY SWITCH
RETURN TO SETUP MENU
OTHER
SERIAL INTERFACE CONDITION
CUSTOMIZE VALUE
MEMORY SWITCH
SELECTION ITEM
POWER ON STATUS
RETURN TO SETUP MENU
RETURN TO UP
COVEROPEN ERROR
BM CHECK AT POW-ON
SELECTION ITEM
POWER ON STATUS
POWER ON STATUS
POWER ON STATUS
SELECTION ITEM
Note:
Use a roll of paper having a diameter no larger than 50 mm.
Using a larger roll might cause the paper to fold or abnormal
noise. To use a Windows PC as the host, use the setup utility
software. (To purchase the setup utility software, contact your
sales agent.)
(4) After the setup is complete and "END" is printed, press the FEED
switch for about two seconds. This cancels setup mode, and
initialization of the printer begins.
•
DISABLE
DISABLE
ENABLE
SELECTION ITEM
56
:Setup group items
:Setup items
(of memory switch)
:Detail setup items
(of power-on notification)