Appendix2 Daily Care; Cleaning Method; Cleaning Materials - Fujitsu fi-5120C Getting Started Manual

Appendix2
ARNI N G

■ Cleaning Materials

Cleaning
Materials
Cleaner F1 PA03950-
0352
Cleaning Wipe PA03950-
0419
Lint-free dry Commercially available one
cloth
*1) For details about cleaning materials, contact the
FUJITSU scanner dealer where you purchased the
scanner.
AP-4
DAILY CARE
•
The glass surface inside the
ADF becomes hot during the
operation.
Before you clean inside the
scanner, turn off its power and
unplug the AC adapter from
the outlet. Wait for at least
15 minutes.
Do not turn off the scanner
when you clean the Feed roll-
ers.
•
When you perform cleaning,
make sure that the inside of
the scanner is free of any for-
eign object, and be careful not
to get your hand or the cloth
caught on the pick spring
(metal part) as a deformed
pick spring (metal part) may
cause injury.
Parts
Remarks
Number
1 bottle
Moisten the cloth with
this fluid and wipe the
scanner clean. (*1)
24 sheets/pack
Pre-moistened with
Cleaner F1, Cleaning
Wipes are used instead
of moistened cloths.
(*1)

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-
ened with the Cleaner F1.
It may take long before the cleaner
ATTENTION
vaporizes if a large quantity is used.
When cleaning the scanner parts,
dampen a cloth with modest quantities of
the cleaner. In addition, wipe off the
cleaner completely with a soft lint-free
cloth to leave no residue on the surface
of the cleaned parts.
■ Parts to Clean and When
Part to clean
Pad ASSY
Pick roller
Feed rollers
Plastic rollers
Glass
The scanner must be cleaned frequently
ATTENTION
if you scan any of the following type of
paper sheets:
•
Documents of coated paper
•
Documents that are almost completely
covered with printed text or graphics
•
Chemically treated documents such as
carbonless paper
•
Documents containing a large amount
of calcium carbonate
•
Handwritten documents
For details on the cleaning the ADF, refer to "3.3 Clean-
ing the ADF" in fi-5120C/fi-5220C Operator's Guide on
the Setup CD-ROM".
Standard Cleaning Cycle
Clean these parts after every
1,000 scans.