Setting Oven Controls - Frigidaire 139900900 Use & Care Manual

Table of Contents

Advertisement

SETTING OVEN CONTROLS

1
2
Oven Control Features
To get the best use of your oven, take some time to become
familiar with the various features and functions of you oven
model. Detailed instructions on using each oven feature
and function of the controls can be found in this section of
the owner's manual.
1. Clock - Use to set the time of day.
2. Timer on-off - Use to set or cancel the minute timer.
The minute timer does not start or stop any cooking
function. Timer on-off is used to set the continuous bake
function.
3. Bake time - Enters the length of baking time desired.
4. Start time - Use to set the desired start time for baking
and self-clean. May be used with bake time to program
a delayed timed bake.
5. Oven light - The oven light will glow each time the oven
turns on to maintain the set oven temperature.
6. Preheat light - The preheat light will glow when the
oven is first set to operate or if the desired temperature
is reset higher than the actual oven temperature.
7. Door locked - The door locked light will flash when the
oven door locks/unlocks, when the oven door lockout is
active, or when self-clean cycle feature is active.
8. Up and Down arrows - Use with the feature or function
keys to set oven temperature, bake time, start time,
clean time (when programming an automatic start time),
and setting or adjusting the clock and minute timer.
9. Bake - Use to select bake feature.
10. Clear-off - Use to clear any feature previously entered
except the time of day and minute timer. Press clear off
to stop cooking. Also use clear off to activate oven
lockout feature.
11. Broil - Use to set Broil feature.
12. Clean - Use to set self-clean cycle.
18
3
5
6
4
7
8
Setting the Clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash 12:00. It is recommended to always set the clock
for the correct time of day before using the appliance.
To set the clock:
1. Press clock once (do not hold clock key down).
2. Within 5 seconds, press and hold
the correct time of day appears in the display.
The clock cannot be changed when the oven is set for
cooking or self-clean is active.
Temperature Display (Fahrenheit/Celsius)
The electronic oven control is set to operate in Fahrenheit
(°F) at the factory. The oven may be programmed for any
temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to Celsius (°C) or from °C to
°F:
1. Press broil. — — appears in the display.
2. Press and hold
3. Press and hold broil until °F or °C appears in the display.
4. Press
or
accept the change, wait 6 seconds.
11
9
11
10
12
or
until HI appears in the display.
to change °F to °C or °C to °F. To
until

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents