IMPORTANT SAFETY INSTRUCTIONS CAUTIONS AND WARNINGS Read all instructions before using this appliance. This manual contains important safety symbols and Storage In or On Appliance—Flammable materials instructions. Please pay attention to these symbols should not be stored in an oven, near surface and follow all instructions given.
IMPORTANT SAFETY INSTRUCTIONS • Do Not Leave Children Alone - Children should • When heating fat or grease, watch it closely. not be left alone or unattended in the area where Grease may catch fire if it becomes too hot. appliance is in use.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP • Know which knob or key controls each surface Read and follow the below instructions and precau- heating area. Place cookware with food on the tions for unpacking, installing, and servicing your cooking area before turning it on.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR IMPORTANT INSTRUCTIONS FOR CLEANING OVEN YOUR OVEN • Use care when opening oven door, lower oven door, or warmer drawer (some models). Stand to the side of the appliance when opening the door of Before manually cleaning any part of the appliance, a hot range.
IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS Do not use an adapter plug or an extension cord, or remove grounding prong from the power cord. Failure to follow this warning may cause serious injury, fire, or death. For personal safety, this appliance must be properly grounded.
BEFORE SETTING SURFACE CONTROLS Cookware Material Types Using Proper Cookware The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan The size and type of bottom. The most popular materials available are: cookware used will influ- Aluminum - Excellent heat conductor.
BEFORE SETTING SURFACE CONTROLS About the Ceramic Glass Cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element under- Do not allow aluminum foil, or any material that can melt, neath.
BEFORE SETTING SURFACE CONTROLS Hot Surface Indicator Light (some models) Home Canning The hot surface indicator light located on the cooktop will glow when any surface cooking area heats up and will remain on until the glass cooktop has cooled to a moderate Canning can generate large amounts of steam.
SETTING SURFACE CONTROLS Surface Cooking Settings The size and type of utensil used, and the amount and type of food being cooked will influence the surface element Start most cooking operations on a higher setting and power level setting needed for best cooking results. then turn to a lower setting to finish cooking.
SETTING SURFACE CONTROLS Single Radiant Surface Elements (some models) The cooktop has two or three single radiant surface elements: the left rear position, the right rear position. The Do not allow aluminum foil, empty glass/porcelain left rear element may also be used with the Bridge element. cookware or any material that can melt to make contact with the ceramic cooktop.
SETTING SURFACE CONTROLS Dual Surface Radiant Element (some models) To Operate the Dual Surface Element: 1. Place correctly sized cookware on the dual surface The cooktop is equipped with 1 or 2 dual radiant surface element. elements. Symbols around the knob are used to indicate which element of the dual radiant element will heat.
SETTING SURFACE CONTROLS Radiant elements have a limiter that allows the element to cycle on and off, even at the HI setting. This helps to prevent damage to the ceramic smooth top. Cycling at the HI setting is normal and can occur if the cookware is too small for the radiant element or if the cookware bottom is not flat.
SETTING SURFACE CONTROLS Keep Warm Zone (some models) To Set the keep warm zone control: The purpose of the keep warm zone is to keep hot cooked foods at serving temperature. Use the keep warm feature to keep cooked foods hot such as: vegetables, gravies, casse- roles, soups, stews, breads, pastries and oven-safe dinner The keep warm zone will not glow red when it is hot, but plates.
SETTING SURFACE CONTROLS Table 2: Warm zone recommended food settings Food Item Heating Level Breads/Pastries lo (Low) Casseroles lo (Low) Dinner plates with food lo (Low) Eggs lo (Low) Gravies lo (Low) Meats med (Medium) Sauces med (Medium) Soups (cream) med (Medium) Stews med (Medium)
BEFORE SETTING OVEN CONTROLS Type of oven racks Oven Vent Location The oven is vented as shown below. When the oven is on, flat handle warm air is released through the vent. This venting is oven rack necessary for proper air circulation in the oven and good baking results.
SETTING OVEN CONTROLS Oven Control Features Setting the Clock To get the best use of your oven, take some time to become When the appliance is first plugged in or when the power familiar with the various features and functions of you oven supply to the appliance has been interrupted, the display model.
SETTING OVEN CONTROLS Table 3: Minimum and maximum control settings Feature Mode Minimum Temp. /Time Maximum Temp. /Time Preheat 170°F (77°C) 550°F (288°C) Bake 170°F (77°C) 550°F (288°C) Broil 400°F (205°C) 550°F (288°C) Timer 12 Hr. Mode 0:01 Min. 11:59 Hr./Min. 24 Hr.
SETTING OVEN CONTROLS Setting Oven Lockout The control can be programmed to lock the oven door and The minute timer will not start or stop the cooking lockout the oven control keypad. process. The minute timer can be used alone or while To set the oven lockout feature: using any of the other oven features.
SETTING OVEN CONTROLS Setting bake The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 288°C). The factory preset automatic bake temperature is 350°F (177°C). To set bake: 1. Press bake. — — — appears in the display. 2.
SETTING OVEN CONTROLS Setting Bake Time Setting Start Time The bake time key sets the amount of time needed for Use the start time key to delay the starting time (delayed baking. The oven will turn on immediately and stop auto- timed bake).
SETTING OVEN CONTROLS To change the oven temperature (or bake time) after baking has started: 1. Press the function you want to change. • Oven temperature adjustments made will not affect Press to adjust the setting. the broil or self-cleaning feature temperatures. •...
2nd side. and insert. Always pull the oven rack out to the stop position before turning or removing food. To purchase a broiling pan and insert, visit frigidaire.com 8. When broiling is finished press clear off. Table 4: Broil recommendations...
SETTING OVEN CONTROLS Self-Cleaning A self-cleaning oven cleans itself with temperatures well above normal cooking temperatures which eliminate soils completely or reduces them to a fine powdered ash you can During the self-cleaning cycle, the outside of the range wipe away with a damp cloth. can become very hot to the touch.
SETTING OVEN CONTROLS To set a self-clean cycle or a delayed start self- To stop or interrupt a self-clean cycle (once it has clean cycle: been activated) 1. Be sure the clock displays the correct time of day. 1. Press clear off. 2.
CARE AND CLEANING Cleaning Various Parts of Your Range Before cleaning any part of the oven, be sure all controls are turned off and the oven is cool. Remove spills and any heavy soiling as soon as possible. Regular cleaning will reduce the difficulty and time of major cleaning later. Surface Type Recommendation Aluminum and Vinyl...
CARE AND CLEANING Control panel Before cleaning the control panel, turn all controls off, activate oven lockout (on some Control keypad membrane models), and if needed remove any knobs from panel. Do not use abrasive cleaners Decorative trim (some models) on any of these materials;...
CARE AND CLEANING Cooktop Maintenance Cooktop Cleaning Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop. Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme to the ceramic Do not use a cooktop cleaner on a hot cooktop. The surface (on the web visit www.sears.com for replacement fumes can be hazardous to your health, and can cooktop cleaner, item number 40079).
CARE AND CLEANING Plastic or foods with a high sugar content need be removed General Cleaning immediately if spilled or melted onto the ceramic cooktop Refer to “Cleaning Various Parts of Your Range” surface. Permanent damage (such as pitting of the cooktop page 27 for more detailed information about cleaning surface) may occur if not removed immediately.
CARE AND CLEANING Removing and Replacing the Oven Door To remove oven door: Oven door hinge locations The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. 1. Open oven door completely, horizontal with floor (See Figure 18).
CARE AND CLEANING Replacing the Oven Light Replacing the oven interior light bulb: Be sure the oven is unplugged and all parts are cool before replacing oven light. The interior oven lights are located at the rear of the oven cavity and are covered with a glass shield.
BEFORE YOU CALL Oven Baking For best cooking results, heat the oven before baking cookies, breads, cakes, pies, pastries, et cetera. There is no need to preheat the oven for roasting meat or baking casseroles. The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appli- ance.
BEFORE YOU CALL Solutions to Common Problems: Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided with the problem listed: Problem Solution Poor baking results. Many factors effect baking results. Use proper oven rack position. Center food in the oven and space pans to allow air to circulate.
BEFORE YOU CALL Soil not completely removed after Self clean was interrupted. Review instructions on “Self-Cleaning” page self clean. Excessive spills on oven bottom. Clean before starting self clean. Failure to clean soil from the oven frame, the door liner outside the oven door gasket, and the small area at the front center of the oven bottom.
BEFORE YOU CALL Cannot move appliance easily. Cabinets not square or are built in too tightly. Contact builder or installer to make Appliance must be accessible for appliance accessible. service. Carpet interferes with appliance. Provide sufficient space so appliance can be lifted over carpet.
WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.